Door Key Cylinder Switch Test
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
- Disconnect the 3P connector from the key cylinder switch.
- Check for continuity between the terminals.
- There should be continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is in LOCK position. (Except VAN and LX models)
- There should be no continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is in the neutral or UNLOCK position. (Except VAN and LX models)
- There should be continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is in UNLOCK position.
- There should be no continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is in the neutral or LOCK position.
- If the continuity is not as specified, replace the door key cylinder assembly (see FRONT DOOR OUTER HANDLE REPLACEMENT ).