Engine Oil Replacement

Warm up the engine.
Remove the right rear splash shield.

Fig 1: Removing Right Rear Splash Shield And Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the drain bolt (A), and drain the engine oil.

Fig 2: Removing Drain Bolt And Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Reinstall the drain bolt with a new washer (B).
Refill with the recommended oil .
Capacity

At Oil Change:

2.3 L (2.4 US qt)

At Oil Change including Filter:

2.5 L (2.6 US qt)

After Engine Overhaul:

3.0 L (3.2 US qt)
Run the engine for more than 3 minutes, then check for oil leakage.