Gauge Control Module Replacement

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Remove the screws from the gauge control module (A), and spread a protective cloth (B) on the upper column cover.

Fig 1: Removing Screws From Gauge Control Module
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (C), and remove the gauge control module.
Install the gauge in the reverse order of removal.