Forced Starting of Display

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

SCS service connector 07PAZ-0010100

Connect the SCS service connector (A) to the navigation service check connector (B) located behind the navigation unit.

Fig 1: Connecting SCS Service Connector To Navigation
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Turn the ignition switch ON (II).
Check that the system starts up and then changes to the "Navi System Link" screen.
NOTE: If the system fails to display the "Navi System Link" screen, refer to NO PICTURE IS DISPLAYED (see ).