Modulator Unit Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Install the modulator unit, then connect the brake lines. Tighten the flare nuts to 15 N.m (1.5 kgf.m, 11 lbf°Ft).
- Bleed the brake system, starting with the front wheels.
- Reinstall the intake air duct (see step 48 on INSTALLATION ).
- Start the engine, and check that the ABS indicator and TCS indicator go off.
- Test-drive the vehicle, and check that the ABS indicator and TCS indicator do not come on.