LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Automatic Transmission (CVT)) >> CVT >> Speed Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed Sensor Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the connectors from the CVT input shaft (drive pulley) speed sensor (A), the CVT output shaft (driven pulley) speed sensor (B), and the CVT speed sensor (C).
    Fig 1: Loosening Torque Of CVT Input Shaft (Drive Pulley) Speed Sensor, CVT Output Shaft (Driven Pulley) Speed Sensor, And CVT Speed Sensor Bolts And Torque Specifications
    G03681970Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the 6 mm bolts, then remove the speed sensors.
  3. Replace the O-rings (D) with new ones before installing the speed sensors.
  4. Install the CVT input shaft (drive pulley) speed sensor, CVT output shaft (driven pulley) speed sensor, and CVT speed sensor.
  5. Check the speed sensor connectors for rust, dirt, or oil, then connect the connectors securely.
scientia non olet · About LEMON Manuals