LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2002 >> S2000 >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Jet Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Jet Inspection

  1. Remove the oil jet, and inspect it as follows.
    • Make sure that a 1.5 mm (0.059 in.) diameter drill will go through the nozzle hole (A) (1.6 mm (0.062 in.) diameter).
    • Insert the end of a 1.1 mm (0.043 in.) drill into the oil intake (1.2 mm (0.047 in.) diameter).
    • Make sure the check ball (B) moves smoothly and has a stroke of approximately 4.0 mm (0.16 in.).
    • Check the oil jet operation with an air nozzle. It should take at least 200 kPa (2.0 kgf/cm2 , 28 psi) to unseat the check ball.
      NOTE: Replace the oil jet assembly if the nozzle is damaged or bent.
      Fig 1: Identifying Diameter Dimension Of Drill
      G03692480Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. The mounting torque is critical. Be very precise when installing the oil jet.

    Torque: 16 N.m (1.6 kgf.m, 12 lbf.ft) 

scientia non olet · About LEMON Manuals