LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2003 >> CR-V EX, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless/Power Door Lock System >> Keyless Receiver Unit Input Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Receiver Unit Input Test

  1. Remove the dashboard pocket (see DASHBOARD POCKET REMOVAL/INSTALLATION ).
  2. Disconnect the 5P connector (A) from the keyless receiver unit (B).
    Fig 1: Disconnecting 5-Pin Connector From Keyless Receiver Unit
    G01474576Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Inspect the connector and socket terminals to be sure they are all making good contact.
    • If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
    • If the terminals are OK, go to step 4.
  4. Reconnect the connector, and make these input tests at the connector.
    • If any test indicates a problem, find and correct the cause, then recheck the system.
    • If all the input tests prove OK, go to step 5.
      Fig 2: Keyless Receiver Unit Input Test (1 Of 2)
      G01474577Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Disconnect the connector, and make this input test at the connector.
    • If the test indicates a problem, find and correct the cause, then recheck the system.
    • If the input test proves OK, replace the keyless receiver unit.
      Fig 3: Keyless Receiver Unit Input Test (2 Of 2)
      G01474578Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals