Fuel Tank Replacement: Installation
WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel tank in the reverse order of removal.
- After installing, bleed the brake system (see BRAKE SYSTEM BLEEDING ), and adjust the wheel alignment (see WHEEL ALIGNMENT ).
- Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs 2 seconds, the fuel pressure in the fuel line rises. Repeat this 2 or 3 times, then check whether there is any fuel leakage.