Cruise Control Main Switch Test/Replacement

Remove the driver's dashboard lower cover (see appropriate INSTRUMENT PANELS article).
Release the clips of the main switch and push the main switch (A) out of the panel, then disconnect the 5P connector (B) from the main switch.

Fig 1: Disconnecting The 5P Connector From The Main Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table. If the continuity is not as specified, replace illumination bulbs (C) or the switch.

Fig 2: Cruise Control Main Switch Continuity Test Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.