LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2004 >> Insight Standard >> Repair and Diagnosis (Single Page) >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> IMA System >> DTC Troubleshooting >> DTC P0A82 (63): Battery Module Overheating; DTC P1448 (63): Battery Module Overheating
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0A82 (63): Battery Module Overheating; DTC P1448 (63): Battery Module Overheating

NOTE:
  • Information marked with an asterisk (*) applies to 2005-2006 models.
  • Information marked with double asterisk (**) applies to 2000-2004 models.
  • The IMA system indicator may indicate DTC P0A82 (63)* (P1448 (63)**) when the inlet port of the duct or the area around the spare tire is blocked.
  1. Turn the ignition switch ON (II).

    Is DTC P0A82 (63)* (P1448 (63)**) or P0A7E (72)* (P1449 (72)**) indicated? 

    1. YES  - Replace the battery module (see BATTERY MODULE REMOVAL/INSTALLATION ).
    2. NO  - Go to step 2.
  2. Turn the ignition switch OFF.
  3. Turn the battery module switch OFF (see TURNING OFF POWER TO THE HIGH VOLTAGE CIRCUIT ).
  4. Remove the IPU lid (see TURNING OFF POWER TO THE HIGH VOLTAGE CIRCUIT ).
  5. Check the battery module fan (see BATTERY MODULE FAN TEST ) and battery module fan duct.

    Are the battery module fan and battery module fan duct OK? 

    1. YES  - Replace the battery module (see BATTERY MODULE REMOVAL/INSTALLATION ).
    2. NO  - Replace the battery module fan or repair the duct as necessary.
scientia non olet · About LEMON Manuals