Power Mirror Replacement
- Lower the door glass fully.
- Carefully detach the clips, and release the hooks (A, B), then pry out the mirror mount cover (C) by hand in the sequence shown.
- Disconnect the connector (A).
- While holding the mirror, remove the bolts securing the mirror.
- While holding the mirror, push in on the connector clips (A), then push out to remove the mirror (B). Take care not to scratch the door.
- Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- Replace any damaged clips.
- Push the clips into place securely.