Cruise Control Set/Resume/Cancel Switch Test/Replacement

Remove the driver's airbag (see AIR BAG RESTRAINT SYSTEMS ).
Remove the cover (A), then remove the set/resume/cancel switch (B).

Fig 1: Removing Cover & Set/Resume/Cancel Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.
- If there is continuity, and it matches the table, but switch failure occurred on the cruise control actuator input test, check and repair the wire harness on the switch circuit.
- If there is no continuity in one or both positions, replace the switch.
Fig 2: Checking Continuity Between Terminals In Each Switch Position
Courtesy of AMERICAN HONDA MOTOR CO., INC.