'04-05 Models: Installation
- Install the ABS modulator-control unit, then tighten the three 6 mm bolts.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Align the connecting surface of the ABS modulator-control unit 25P connector.
- Push in the lock of the ABS modulator-control unit 25P connector until you hear it click into place, then connect the connector.
- Bleed the brake system, starting with the front wheels (see
BRAKE SYSTEM BLEEDING
).
- Start the engine, and check that the ABS indicator goes off.
- Test-drive the vehicle, and check that the ABS indicator does not come on.