Transmission Temperature Sensor/Switch: Service and Repair

ATF Temperature Sensor Replacement





1. Remove the transmission lower mount nuts.
2. Place the transmission jack under the transmission, and lift it up until the studs of the transmission lower front mount clear the subframe.





3. Remove the transmission lower front mount.





4. Disconnect the ATF temperature sensor connector (A).
5. Remove the ATF temperature sensor harness clamp bolts (B), then remove the ATF temperature sensor(C).
6. Install the new ATF temperature sensor with a new O-ring (D).
7. Install the harness clamp, then connect the connector.
8. Install the transmission lower front mount.
9. Lower the transmission, then install the transmission lower mount nuts.
10. Remove the transmission jack.