ECT Sensor 1 Replacement
- Drain the engine coolant (see COOLANT REPLACEMENT
).
- Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION
).
- Disconnect the CMP sensor A 3P connector (A), and the CMP sensor B 3P connector (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the harness cover (C).
- Disconnect the ECT sensor 1 2P connector (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove ECT sensor 1 (B).
- Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT REPLACEMENT
).