DTC P0A65 (29): Motor Current W Phase Signal Circuit High Input: General Description
If the input voltage to the MCM (motor control module) from the W phase motor current sensor is above the upper limit, a faulty sensor, an open in the sensor power supply, or a faulty MCM input circuit is detected and a DTC is stored.
MONITOR DESCRIPTION CHART
| Execution | Continuous |
| Sequence | None |
| Duration | 0.5 seconds or more |
| DTC Type | One drive cycle, MIL ON, IMA system indicator ON |
ENABLE CONDITIONS CHART
| Condition | Minimum | Maximum |
|---|---|---|
| MCM power-supply voltage | 10.5 V | - |
| Ignition switch | ON | |
| No active DTCs | Motor current sensor C | |