ATF Temperature Sensor Replacement
- Remove the splash shield (see FRONT SPLASH SHIELD REPLACEMENT
).
- Drain the automatic transmission fluid (ATF) (see step 3
).
- Disconnect the ATF temperature sensor connector (A), then remove the connector from the connector bracket (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the harness clamp (C) from its bracket (D).
- Remove the ATF temperature sensor.
- Install a new O-ring (E) on the new ATF temperature sensor (F).
- Install the ATF temperature sensor connector to the connector bracket, then connect the connector securely.
- Install the harness clamp on its bracket.
- Refill the transmission with the ATF (see step 5
).
- Install the splash shield (see FRONT SPLASH SHIELD REPLACEMENT
).