CMP Sensor A Replacement

WARNING: This page is about a different car, the 2006 Honda CR-V and 2005 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
Disconnect CMP sensor A 3P connector.
Remove CMP sensor A (A) from the intake camshaft side of the cylinder head.

Fig 1: Removing CMP Sensor & Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the sensor in the reverse order of removal with a new O-ring (B).