FTP Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda CR-V and 2010 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Raise the vehicle on a lift.
Remove the cover (see step 2 ).
Remove the EVAP canister baffle cover (see step 3 ).
Disconnect the FTP sensor connector (A).

Fig 1: Identifying FTP Sensor Connector, Hose And Retainer
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hose (B), remove the retainer (C), and remove the FTP sensor (D).
Install the parts in the reverse order of removal with a new O-ring (E) and a new retainer.