LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> CR-V LX, 2.4 RE3 >> Repair and Diagnosis >> Engine Performance >> System >> EVAP System >> EVAP Canister Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Canister Replacement

  1. Raise the vehicle on a lift.
  2. Remove the cover (A).
    Fig 1: Identifying Cover With Mounting Screws
    G06610191Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the EVAP canister baffle cover (A).
    Fig 2: EVAP Canister Baffle Cover With Mounting Screws With Torque Specification
    G06610192Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the hoses (A) and the fuel subharness 6P connector (B).
    Fig 3: Hoses And Fuel Subharness 6P Connector With Torque Specification
    G06610193Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the bolts (C) and the EVAP canister bracket (D).
  6. Remove the EVAP canister (A) from the EVAP canister bracket (B).
    Fig 4: EVAP Canister And EVAP Canister Bracket With Torque Specification
    G06610194Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Remove the cap (A).
    Fig 5: Removing EVAP Canister Vent Shut Valve
    G06610195Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Remove the EVAP canister vent shut valve (B).
  9. Install the EVAP canister vent shut valve into the new EVAP canister with new O-rings (C).
    NOTE: Do not coat the O-rings with oil.
  10. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals