Network "Loss of Communication" Error Checking Function
The ECUs on the CAN circuit send messages to each other. If there are any malfunctions on the network, the odo/trip display on the gauge control module can indicate the error messages by entering the gauge self-diagnostic function (see SELF-DIAGNOSTIC FUNCTION ).
4-DOOR ERROR CODE LIST
| Error code | Type of communication line(s) error |
|---|---|
| Error 1 | F-CAN communication |
| Error 2 | B-CAN communication |
| Error 3 | UART communication |
| Error 12 | F-CAN and B-CAN communication |
| Error 13 | F-CAN and UART communication |
| Error 23 | B-CAN and UART communication |
| Error 123 | F-CAN, B-CAN and UART communication |
2-DOOR ERROR CODE LIST
| Error code | Type of communication line(s) error |
|---|---|
| Error 1 | F-CAN communication |
| Error 2 | B-CAN communication |
| Error 3 | F-CAN and B-CAN communication |
| Error 12 | F-CAN and B-CAN communication |
| Error 13 | F-CAN and B-CAN communication |
| Error 23 | F-CAN and B-CAN communication |
| Error 123 | F-CAN and B-CAN communication |
NOTE:
For further information about Error indication, refer to the gauge control module self-diagnostic function (see SELF-DIAGNOSTIC FUNCTION
).