Connecting Rod, Engine
Connecting RodTighten the connecting rod bolts 29 N-m (3.0 kgf-m, 22 lbf-ft)
Tighten the connecting rod bolts an additional 90°.
Connecting rod
Pin-to-rod clearance
Standard or New 0.005-0.015 mm (0.0002-0.0006 in.)
Service Limit 0.02 mm (0.0008 in.)
Small-end bore diameter
Standard or New 21.970-21.976 mm (0.8650-0.8652 in.)
Large-end bore diameter
Standard or New 51.0 mm (2.01 in.)
End play installed on crankshaft
Standard or New 0.15-0.30 mm (0.006-0.012 in.)
Service Limit 0.40 mm (0.016 in.)