Mirror Holder Replacement

Mirror Holder Replacement




1. Carefully pull out the bottom edge of the mirror holder (A) by hand. Take care not to scratch the mirror.
2. Separate the mirror holder from the actuator (B) by slowly pulling them apart while separating the adhesive (C), detaching the clips (D), and releasing the hooks (E). Manual mirror: Release the pin (F) from the pin spring (G).
3. Reattach the hooks of the mirror holder to the actuator, and on the manual mirror, reattach the pin of the mirror holder to the pin spring of the , mirror bracket, then position the mirror holder on the actuator. Carefully push on the clip portions of the mirror holder until the mirror holder locks into place.
4. Check the operation of the actuator.