LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Element SC, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System Components >> VSA Modulator-Control Unit Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSA Modulator-Control Unit Removal and Installation: Removal

  1. Turn the ignition switch to LOCK (0).
  2. Disconnect the VSA modulator-control unit 47P connector (A) by pushing the lock (B) and pulling up the lever (C); the connector disconnects itself.
    Fig 1: VSA Modulator - Control Unit 47P Connector With Torque Specifications
    G05450837Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the six brake lines from the VSA modulator-control unit (D).
    NOTE: Brake lines are connected to the master cylinder (E) and to the right-front (F), the left-rear (G), the right-rear (H), and the left-front (I) brake systems.
  4. Remove the VSA modulator-control unit with the bracket (J) from the body.
  5. Remove the VSA modulator-control unit from the bracket.
scientia non olet · About LEMON Manuals