October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Console (SC model)
- Carefully pry the accessory power socket (A) out from the center console.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Disconnect the 2P connector (A) from the socket.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Inspect the connector terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.
- Turn the ignition switch to ACCESSORY (I).
- Measure the voltage between consol accessory power socket 2P connector terminal No. 1 and body ground. There should be voltage.
- If there is battery voltage, go to step 6.
- If there is no voltage, check for:
- Blown No. 18 (15 A) fuse in the under-dash fuse/relay box.
- A faulty under-dash fuse/relay box.
- An open or high resistance in the wire between under-dash fuse/relay box connector M (12P) terminal No. 3 and front accessory power socket 2P connector terminal No. 1.
- Check for continuity between the console accessory power socket 2P connector terminal No. 2 and body ground. there should be continuity.
- If there is continuity, replace the power socket.
- If there is no continuity, check for:
- Poor ground (G552).
- An open or high resistance in the wire between console accessory power socket 2P connector terminal No. 2 and ground (G552).