Using the HDS (Preferred method)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

Connect the HDS to the Data Link Connector (DLC).

There are two ways to read B-CAN code with the HDS:

First method: If multiple DTCs are stored, be sure to follow the instructions in B-CAN system diagnosis. Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
Second method: If no DTCs are retrieved, use B-CAN System Diagnostic Test Mode 2 (see ) to check all inputs related to failure.