Self-Diagnostic Function
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure should be used only if HDS is unavailable.
To run the self-diagnostic function, do the following:
- Turn the ignition switch to ON (II).
- Press and hold the HFL BACK button for more than 5 seconds.
- When the HandsFreeLink system enters the self-diagnostic function, the following will occur.
- If the system has not completed testing for DTCs, the HandsFreeLink system says "The hands free system test is in progress."
- If there is no DTC, the HandsFreeLink system says "The hands free system is OK."
- If there is any DTC, the HandsFreeLink system says "The hands free system needs to be serviced."NOTE:
- The self-diagnostic function can only be initiated while the HFL is in its idle state.
- The self-diagnostic function starts after you press and hold the HFL BACK button for 5 seconds, and ends if the HandsFreeLink control unit returns to its idle state.