Immobilizer Control Unit-Receiver Replacement
- Remove the dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
- Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
- Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
- Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).
- Install the immobilizer control unit-receiver in the reverse order of removal.
- After replacement, register the unit with the HDS (see IMMOBILIZER CONTROL UNIT-RECEIVER REGISTRATION ), then check the immobilizer system.