'07-08 Models
- Remove the driver's airbag assembly (see DRIVER S AIRBAG REPLACEMENT ).
- Remove the two screws and cover (A) from the steering wheel.
- Remove the two screws from the audio remote switch (B).
- Disconnect the 4P connector from the audio remote switch.
- Measure the resistance between the No. 3 and No. 4 terminals in each switch position according to the table below.RESISTANCE REFERENCE TABLE
Position Resistance No button pressed About 10 kΩ MODE About 2.4 kΩ CH About 900 Ω ↑ (VOL. UP) About 300 Ω ↓ (VOL. DOWN) About 50 Ω - If the resistance is not as specified, replace the audio remote switch.