Special Tools Required

KTC trim tool set SOJATP2014*

*Available through the American Honda Tool and Equipment Program; call 888-424-6857

1. Remove the hatch trim panel (see TRIM REMOVAL/INSTALLATION - HATCH AREA ).
2. Pry the hatch handle covers (A) out from both sides using the appropriate tool from the KTC trim tool set, then remove them from the hatch handle (B).
   Fig 1: Identifying Hatch Handle Covers

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the nuts, then remove the hatch handle (A) from the hatch (B).
   Fig 2: Identifying Hatch Handle Nuts

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Disconnect the hatch opener cable (A) from the handle (B). Take care not to kink the cable.
   Fig 3: Identifying Hatch Opener Cable

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
5. Install the hatch handle in the reverse order of removal, and note these items:
   • Make sure the hatch opener cable is connected securely.
   • Make sure the hatch opens properly.