LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Element SC, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Supply System >> Fuel Pressure Regulator Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pressure Regulator Replacement

  1. Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL/INSTALLATION  ).
  2. Remove the clip (A).
    Fig 1: Identifying Fuel Pressure Regulator, O-Ring, Drain Hole & Clip
    G05449259Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the fuel pressure regulator (B).
  4. Install the parts in the reverse order of removal with new O-rings (C).

    Make sure the regulator is installed with the drain hole (D) facing down.

    NOTE: Coat the O-rings with clean engine oil. Do not pinch the O-rings during installation. Never apply brake fluid, vegetable oil, or alcohol-based oil to the O-rings.
scientia non olet · About LEMON Manuals