DVD-ROM Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Check any official Honda service website for more service information about the navigation system and software updates.
Do not insert a newer navigation DVD to give a customer a preview of an update DVD. If your customer wishes to see the latest coverage or software features, demonstrate it on an in-stock vehicle that already has the latest navigation DVD version.

Remove the passenger's floor side lid (see TRIM REMOVAL/INSTALLATION - CARGO AREA ).
Turn the ignition switch to ON (II).
Push the open button (A) of the navigation unit.

Fig 1: Identifying Open Button And EJECT Button
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Press the EJECT button (B).
Remove the navigation DVD
Insert the new navigation DVD with the label facing up.
Close the front cover. Do not turn the ignition switch to LOCK (0); watch the navigation screen until the data is downloaded to the navigation unit.
Do the Map Matching (see MAP MATCHING ).
NOTE: After servicing, the front cover and PC card slot door must be closed. If you start up the navigation system with the front cover or PC card slot door open, the display will indicate an error message.