Brake System Inspection and Test: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged.

Component Inspections:

BRAKE SYSTEM COMPONENT REFERENCE

Component	Procedure	Also check for
Master Cylinder	Look for damage or signs of fluid leakage at: Reservoir or reservoir grommets. Line joints. Between master cylinder and booster.	Bulging seal at reservoir cap. This is a sign of fluid contamination.
Brake Hoses	Look for damage or signs of fluid leakage at: Line joints and banjo bolt connections. Hoses and lines, also inspect for twisting or damage.	Bulging, twisted, or bent lines.
Caliper	Look for damage or signs of fluid leakage at: Piston seal. Banjo bolt connections. Bleed screw.	Seized or sticking caliper pins.
VSA Modulator-control Unit	Look for damage or signs of fluid leakage at: Line joints. Modulator-control unit.