Calibration - Models Without TPMS Switch
- Make sure the tires are inflated to the specified tire pressure listed on the doorjamb label. Vehicle must be stopped with the transmission in neutral (M/T) or P or N (A/T, CVT).
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
- Use ARROW buttons (right side of steering wheel) to select VEHICLE SETTINGS, then press the SEL/RESET button. TPMS CALIBRATION appears on the display.
- Press the SEL/RESET button. The display switches to the customization setup screen, where you can select CANCEL or CALIBRATE.
- Use ARROW buttons to select CALIBRATE, then press the SEL/RESET button. CALIBRATION STARTED screen appears, then the display returns to the customization menu screenNOTE: If the CALIBRATION FAILED TO START message appears, repeat steps 4 and 5.
- Calibration is completed after driving 31 to 62 mph (50 to 100 km/h), steadily without much acceleration or deceleration for about 30 minutes.