TPMS Reminder Reset - Procedure 09: Notes

This vehicle is equipped with an indirect TPMS that doesn't use tire pressure sensors mounted inside the tires. It uses the existing VSA wheel speed sensors to monitor and compare tire characteristics while driving.

Calibration begins when it is selected through the Multi-information display (7-inch screen) or the TPMS switch is pressed (5-inch screen). Calibration is completed after driving 28 to 65 mph (50 to 100 km/h), steadily without much acceleration or deceleration for about 20 minutes.

TPMS calibration is required after performing any of the following actions:

• Adjusting tire pressures
• Rotating the tires
• Replacing the tires
• Updating/replacing the VSA modulator-control unit