Skid Control ECU Communication Stop Mode: Description
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING TABLE
| Detection Item |
Symptom |
Trouble Area |
| SKID CONTROL ECU COMMUNICATION STOP MODE |
- ABS/VSC/TARC is not displayed on the "BUS CHECK" screen of the intelligent tester via the CAN VIM.
- DTCs are output from each ECU in skid control ECU communication stop mode as shown in the "DTC COMBINATION TABLE" (See DTC COMBINATION PROBLEM SYMPTOMS TABLE
).
|
- Power source or inside the skid control ECU
- Skid control ECU sub bus line or connector
|