LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Drive Plate Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Plate Removal and Installation

  1. Remove the transmission assembly (see TRANSMISSION REMOVAL ).
  2. Remove the drive plate (A) and the washer (B) from the engine crankshaft.
    Fig 1: Drive Plate And Washer With Washer With Torque Specification
    G05455378
  3. Install the drive plate and the washer on the engine crankshaft, and tighten the six bolts in a crisscross pattern in at least two steps.
  4. Install the transmission assembly (see TRANSMISSION INSTALLATION ).
scientia non olet · About LEMON Manuals