Oil Filter Feed Pipe Replacement

Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT ).
Remove the oil filter feed pipe.

Fig 1: Identifying Oil Filter Feed Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold the nut with a wrench, then tighten the other nut.

Fig 2: Identifying Oil Filter Nuts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Tighten the oil filter feed pipe to 74 N.m (7.5 kgf.m, 54 lbf.ft), then remove the nuts from the oil filter feed pipe.
Install the oil filter (see ENGINE OIL FILTER REPLACEMENT ).