Torque Specifications
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
AIR CONDITIONING TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Negative battery terminal x Battery | 3.9 | 40 | 35 in.*lbf |
AIR CONDITIONING UNIT
AIR CONDITIONING UNIT TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Expansion valve x Evaporator core | 7.0 | 71 | 62 in.*lbf |
| Valve to connector tube x Expansion valve | 25 | 255 | 18 |
| Mode case x Main case | 2.0 | 20 | 18 in.*lbf |
| Heater pivot x Main case | 2.0 | 20 | 18 in.*lbf |
| Mode mounting plate x Main case | 2.0 | 20 | 18 in.*lbf |
| Mode mounting plate x Mode case | 2.0 | 20 | 18 in.*lbf |
| Blower motor x Main case | 2.0 | 20 | 18 in.*lbf |
| Blower resister x Main case | 2.0 | 20 | 18 in.*lbf |
| Heater radiator assembly x Main case | 2.0 | 20 | 18 in.*lbf |
| Temperature mounting plate x Main case | 2.0 | 20 | 18 in.*lbf |
| Temperature mounting plate x Heater radiator | 2.0 | 20 | 18 in.*lbf |
| Air inlet control servo motor x Main case | 2.0 | 20 | 18 in.*lbf |
| Air mix control servo motor x Temperature mounting plate | 2.0 | 20 | 18 in.*lbf |
| Mode control servo motor x Mode mounting plate | 2.0 | 20 | 18 in.*lbf |
| No. 1 air duct x Mode case | 2.0 | 20 | 18 in.*lbf |
| Heater to register center duct x Mode case | 2.0 | 20 | 18 in.*lbf |
| Defroster nozzle assembly lower x Mode case | 2.0 | 20 | 18 in.*lbf |
| Air conditioning unit assembly x Body | 5.0 | 51 | 44 in.*lbf |
| Air conditioning unit assembly x Instrument panel reinforcement | 5.0 | 51 | 44 in.*lbf |
| Air conditioning amplifier assembly x Instrument panel reinforcement | 7.0 | 71 | 62 in.*lbf |
| Driver side junction block x Instrument panel reinforcement | 8.0 | 82 | 71 in.*lbf |
| Bracket x Driver side junction block | 8.0 | 82 | 71 in.*lbf |
| Air conditioning tube assembly x Body | 7.5 | 76 | 66 in.*lbf |
| Suction hose sub-assembly x Body | 7.5 | 76 | 66 in.*lbf |
COMPRESSOR AND MAGNETIC CLUTCH
COMPRESSOR AND MAGNETIC CLUTCH TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Magnet clutch hub x Cooler compressor assembly | 13.5 | 138 | 10 |
| Pressure relief valve x Cooler compressor assembly | 8.0 | 82 | 71 in.*lbf |
| Compressor pick up sensor x Cooler compressor assembly | 4.0 | 41 | 35 in.*lbf |
| Compressor and magnetic clutch x Compressor bracket | 21 | 214 | 16 |
| Discharge hose sub-assembly x Compressor and magnetic clutch | 19 | 194 | 14 |
| Suction hose sub-assembly x Compressor and magnetic clutch | 19 | 194 | 14 |
| Suction hose sub-assembly x Timing chain cover | 7.5 | 76 | 66 |
CONDENSER
CONDENSER TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Condenser assembly x Body | 7.5 | 76 | 66 in.*lbf |
| Air conditioning tube assembly x Condenser assembly | 7.5 | 76 | 66 in.*lbf |
| Discharge hose sub-assembly x Condenser assembly | 7.5 | 76 | 66 in.*lbf |