License Plate Light Assembly: Removal

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE LICENSE PLATE LIGHT ASSEMBLY
1. Disconnect the connector.
2. Remove the screw and license plate light assembly.
  
  Fig 1: Removing License Plate Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. To remove the license plate light bulb socket and bulb, turn them in the direction indicated by the arrow in Fig 2.
  
  Fig 2: Removing License Plate Light Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the license plate light bulb from the light socket.