Typical Enabling Conditions
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | None |
| EVAP key-off monitor runs when all of following conditions met | - |
| Atmospheric pressure | 525 to 825 mmHg (70 to 110 kPa) |
| Battery voltage | 10.5 V or more |
| Vehicle speed | Below 2.5 mph (4 km/h) |
| Ignition switch | OFF |
| Time after key off | 5 or 7 or 9.5 hours |
| Canister pressure sensor malfunction (P0450, P0451, P0452 and P0453) | Not detected |
| Purge VSV | Not operated by scan tool |
| Vent valve | Not operated by scan tool |
| Leak detection pump | Not operated by scan tool |
| Both of following conditions met before IG switch OFF | Conditions 1 and 2 |
| 1. Duration that vehicle driven | 5 minutes or more |
| 2. Purge flow | Executed |
| ECT | 4.4° to 35°C (40° to 95°F) |
| IAT | 4.4° to 35°C (40° to 95°F) |