Typical Enabling Conditions
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS - DESCRIPTION CHART
| Monitor runs whenever following DTCs not present | P0100 - P0103 (MAF meter) |
Cold start monitor:
TYPICAL ENABLING CONDITIONS - DESCRIPTION CHART
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| IAT sensor circuit | OK |
| Soak time | 0 seconds or more |
| Accumulated MAF | 1,589 g or more |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
Soak monitor:
TYPICAL ENABLING CONDITIONS - DESCRIPTION CHART
| Battery voltage | 10.5 V or more |
| Engine | Running |
| IAT sensor circuit | OK |
| Soak time | 5 hours or more |
| ECT at engine start | 60°C (140°F) or more |
| Accumulated MAF | 3,440 g or more |