Typical Enabling Conditions
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS - DESCRIPTION CHART
| Monitor runs whenever following DTCs not present | P0010 (OCV Bank1) P0011 (VVT System 1 - Advance) P0012 (VVT System 1 - Retard) P0031, P0032 (A/F sensor heater - Sensor 1) P0100 - P0103 (MAF meter) P0115 - P0118 (ECT sensor) P0120 - P0223, P2135 (TP sensor) P0125 (Insufficient ECT for closed loop) P0335 (CKP sensor) P0340 (CMP sensor) P0351 - P0354 (Igniter) P0500 (VSS) P2440 (A/R control valve stuck open) P2441 (A/R control valve stuck close) P2444 (AIP stuck ON) P2445 (AIP stuck OFF) |
| Fuel system status | Closed-loop |
| Battery voltage | 11 V or more |
| Catalyst Monitor | Not executed |
| Either of following conditions A or B set | - |
| A. Engine RPM | Below 1,100 rpm |
| B. Intake air amount per revolution | 0.22 g/rev. or more |