LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Ignition System (1GR-FE)) >> VVT Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VVT Sensor: Removal

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. DRAIN ENGINE COOLANT (See  COOLANT  ) 
  3. REMOVE V-BANK COVER (See  REMOVAL  ) 
  4. REMOVE AIR CLEANER ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE VVT SENSOR 
    1. RH bank side VVT sensor:
      1. Disconnect the VVT sensor connector.
      2. Remove the bolt and VVT sensor.
        Fig 1: Removing Bolt & VVT Sensor
        G04409601Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. LH bank side VVT sensor:
      1. Disconnect the water by-pass hoses No. 4 and No. 5.
      2. Disconnect the VVT sensor connector.
        Fig 2: Disconnecting VVT Sensor Connector
        G04409602Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      3. Remove the bolt and VVT sensor.
        Fig 3: Removing Bolt & VVT Sensor
        G04409603Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals