Navigation unit connector A (20P) ('07 model)
NAVIGATION UNIT CONNECTOR A (20P) ('07 MODEL)
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| A1 | WHT | R SIG (Red signal) | Red color signal | 0.2 V AC average in RGB color diagnostic mode | If open: Red color missing (see Color diagnostic). If short to ground: Red color missing (see RGB Color diagnostic). |
||
| A2 | RED | G SIG (Green signal) | Green color signal | 0.2 V AC average in RGB color diagnostic mode | If open: Green color missing (see RGB Color diagnostic). If short to ground: Green color missing (see RGB Color diagnostic). |
||
| A3 | GRY(1) | SIG SH (Shield signal) | Shield for terminals No. 1, 2, 11, 12, 13 | 0 V | If open: No change to display. If short to around: No change to display. |
||
| A4 | RED/BLU | AC-SI (A/C Signal input) | A/C input signal | 0-battery voltage pulses | If open: Voice control does not work for HVAC. If short to ground: Voice control does not work for HVAC. |
||
| A5 | RED/BLK | ILL (+) (Illumination positive) | Parking light on signal from dash and console lights. | Lights on = battery voltage, Lights off = 0 V | If open: When brightness = Auto, night mode for the display is inoperative when lights on. If short to ground: Blows fuse No. 7 (7.5 A) in the passenger's under-dash fuse/relay box. |
||
| A9 | GRY(1) | GA-NET DISP BUS SH (Shield display bus) | Shield for display bus terminals No. 10, 20 | 0 V | If open: No change to display. If short to ground: No change to display. |
||
| A10 | LT BLU | GA-NET DISP BUS (+) (Display bus positive) | Data bus (+) GA-Net | 0-5 V pulses average 2.5 V depends on bus traffic | If open: Navigation buttons, touch screen and XM radio do not work. If short to ground: Navigation buttons and touch screen do not work. |
||
| A11 | YEL | B SIG (Blue signal) | Blue color signal | 0.2 V AC average in RGB color diagnostic mode | If open: Blue color missing (see RGB Color diagnostic). If short to ground: Blue color missing (see RGB Color diagnostic). |
||
| A12 | BRN | C SIG (Composite signal) | Composite video (vertical/horizontal) Synchronizing signal | 0.2 V AC average in RGB color diagnostic mode | If open: Picture rolls horizontally, colors still visible. If short to ground: Picture rolls horizontally, colors still visible. |
||
| A13 | BLU | GND SIG (Ground signal) | Ground for color signal | 0 V | If open: No change to display If short to ground: No change to display. |
||
| A14 | YEL/GRN | AC-SO (A/C Signal output) | A/C output signal | 0-battery voltage pulses | If open: A/C voice control does not work for HVAC. If short to ground: A/C voice control does not work for HVAC. |
||
| A15 | GRN/BLK | AC-CK (A/C Clock signal) | Time set sync signal | 0-battery voltage pulses | If open: A/C voice control does not work. If short to ground: A/C voice control does not work. |
||
| A20 | PUR | GA-NET DISP BUS-(Display bus negative) | Data bus (-) GA-Net | 0-5 V pulses normally 2.5 V (depends on BUS traffic) | If open: Navigation buttons, touch screen and XM radio do not work. If short to ground: Hard and touch buttons work OK. |
||
|
|||||||