Navigation unit connector D (7P) ('08-10 models)

Fig 1: Identifying Navigation Unit Connector D (7P) (08-09 models)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

NAVIGATION UNIT CONNECTOR D (7P) ('08-10 models)

Terminal Number

Wire Color

Terminal Name

Description

Voltage (about)

Symptom

WHT

CAMERA VCC (VCC supply)

Power source for rearview camera

7 V

If open: No rearview camera image.
If short to ground: When put into reverse, the navigation screen goes black (backlight still operative).

RED

CAMERA GND (Ground)

Ground for rearview camera

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

YEL [GRN]

VIDEO GND (Ground camera)

Ground for camera signal

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

BLK

VIDEO (Video camera)

Video signal for rearview camera

0.3 V

If open: No rearview camera image.
If short to ground: When put into reverse, the navigation screen goes black (backlight still operative).

GRY⁽¹⁾

CAMERA SH (Shield camera)

Shield for terminal No. 1 to No. 7

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

GRN [YEL]

CAMERA ADPT (Adaptive camera)

Control signal for rearview camera

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.

[ ] : '08 model