DTC B1013: MICU Lost Communication with Driver's MPCS Unit (ASLOCKSW Message); DTC B1015: MICU Lost Communication with Driver's MPCS Unit (DRLOCKSW Message)
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0), and then back ON (II).
- Wait for 6 seconds or more.
- Check for DTCs with the HDS.
Is DTC B1013 and/or B1015 indicated?
YES - Go to step 5.
NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections between the MICU and the driver's MPCS unit.
- Check for DTCs with the HDS.
Are DTCs B1065, B1082, B1356, B1358, and/or B1905 also indicated with B1013 and/or B1015?
YES - Do the driver's MPCS unit input test (see DRIVER'S MPCS UNIT INPUT TEST ).
NO - Do the MICU input test (see MICU INPUT TEST ).