Forced Starting of Display

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required

SCS Service Connector 07PAZ-0010100

Turn the ignition switch to LOCK (0).
Connect the SCS service connector (A) to the navigation service connector (B) located behind the navigation unit.

Fig 1: Identifying SCS Service Connector And Navigation Service Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Turn the ignition switch to ON (II).
Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the system link menu.
NOTE: If the display fails to display the system link screen, refer to NO PICTURE IS DISPLAYED (see ).