Input Test
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- With the connector still disconnected, make the input tests at the connector according to the table.TERMINAL TEST CHARTS
Terminal Test 5 Measure the voltage to ground with all conditions: There should be battery voltage. 6 Measure the voltage to ground with audio power switch ON: There should be battery voltage. - Reconnect the connector to the subwoofer/ amplifier unit, and make the input test at the connector according to the table.TERMINAL TEST CHART
Terminal Test 4 Measure the voltage to ground with all conditions: There should be less than 0.1 V. - If the input test proves OK and the subwoofer has no sound, replace the faulty subwoofer/amplifier unit.